Lanthanum Strontium Cobalt Oxide Sputtering Targets (La0.5Sr0.5CoO3)
Material Type | Lanthanum Strontium Cobalt Oxide |
Symbol | La0.5Sr0.5CoO3 |
Color/Appearance | Various colors, Solid |
Melting Point (°C) | N/A |
Relative Density (g/cc) | >90% |
Z Ratio | N/A |
Sputter | RF, RF-R, DC |
Max Power Density* (Watts/Square Inch) |
N/A |
Type of Bond | Indium, Elastomer |
Comments |
Lanthanum Strontium Cobalt Oxide Sputtering Targets
Lanthanum Strontium Cobalt Oxide Sputtering Targets Information
Lanthanum Strontium Cobalt Oxide Sputtering Targets
Purity: 99.9%;
Circular: Diameter <= 14 inch, Thickness <= 15 mm;
Block: Length <= 120 +/-0.1 mm, Width <= 120 +/-0.1 mm,Thickness <= 15 mm.
Bonding is recommended for these materials. Many materials have characteristics that are not amenable to sputtering, such as brittleness and low thermal conductivity. This material may require a special ramp up and ramp down procedures. This process may not be necessary for other materials. Targets that have low thermal conductivity are susceptible to thermal shock.
More Information on Lanthanum Strontium Cobalt Oxide Sputtering Targets
Applications• Catalyst• Superconducting, Solid oxide fuel cell cathode
• Super capacitor |
Features• High purity & density• Custom sizes available • Single phase |
Manufacturing Process• In-house powder synthesis, High purity metal oxide precursor materials, High energy mixing, Particle sizing processes
• Multiple step densification, Proprietary processes employed for pressing and sintering
• Cleaning and final packaging, Cleaned for use in vacuum, Protection from environmental contaminants, Protection during shipment
|
Options
• 99.9% minimum purity
• Smaller sizes also available for R&D applications
• Sputtering target bonding service
|
Related Products of Lanthanum Strontium Cobalt Oxide Sputtering Targets
Ceramic Sputtering Targets |
||
Evaporation Materials Cobalt Pellet Evaporation Material Strontium Pellet |
Crucibles N/A |
Metal Powders |